SHELF CABINET WITH REAR PART SERIES 25 i
Detachable shelf cabinet built as follows:
23 mm thick plywood sides with a first-quality beech veneer, drill holes every 32 mm for shelf-holders, two 25 mm wide and 15 mm high nylon levelers, 23 x 7 mm solid wood round edged fronts. Varnished in its own color with a buffed polyurethane back, finished in semiungleazed lacquers.
Metallic shelf-holders blued in black to hold shelves and top part to the side.
19 mm two-side plywood back in first-quality beech wood held to the sides by eccentrics. Varnished in its own color with a buffed polyurethane back, finished in semiungleazed lacquers.
One-single piece 1 mm thick first-quality steel top part with a 55 mm wide section. Finished in epoxy paint.
One-single piece 1 mm thick first quality steel shelves with a 3 cm bottom wing for newspapers or books. Finished in epoxy paint.
Metallic parts: finish with heat-hardened powder, base epoxide resins and polymerized by heating at 200° C previously cleaned, rinsed and chromic passified by phosphating. Choose color from endosad chart.
DIMENSIONS:
Height: 2100, 1750, 1485 or 1205 mm
Shelf width: 900, 990 or 1200 mm
Depth: 320 or 616 mm (single cabinet, accessible only by one side, or
double cabinet, accessible by two sides).
Ask about other dimensions
Color Chart
